Yanex-2M

UV light sensor

UV light sensor

Efficiency of 99.99%

Efficiency of 99.99%

Speed

Speed

Mobility

Mobility

7 operating modes

7 operating modes

Germicidal dose control

Germicidal dose control

Touch screen

Touch screen

Remote Control

Remote Control

Description
Technical specifications
Operating modes
Documents for download

Mobile pulsed xenon UV unit “Yanex-2M” is intended for urgent (within 10 minutes) indoor air and open surfaces disinfection with 99.99% efficiency from bacteria, including their antibiotic-resistant strains (methicillin-resistant Staphylococcus aureus (MRSA), Vancomycin-resistant Enterococci (VRE), Pseudomonas aeruginosa, Acinetobacter baumannii), C. difficile spores, MDR/XDR-TB, viruses and fungi. 

The units operate in the absence of people and animals.

Pulsed UV units “Yanex-2M” are broadly used at healthcare facilities for urgent and routine disinfection in rooms of various profiles including clean rooms. 

Aside from that, they are efficient:

  • At living and public spaces; 
  • In places of mass gathering (railway stations, airports, hotels, restaurants, fitness centers etc); 
  • At manufacturing facilities. 

A mobile pulsed UV unit “Yanex-2M” comprises two basic components:
  1. Compact monoblock with a handle and rubber-covered wheels for convenient transportation by one person; 
  2. Sensor remote control in form of a mobile phone, duplicating most functions of the sensor control panel.

Sensor control panel and remote control can: 

  • Display contact information of the manufacturer; 
  • Display detailed information on existing operating modes, and set desired parameters for air and surfaced disinfection; 
  • Display information on the unit and the lamp;
  • Store parameters of treated rooms;
  • Choose a previously stored room from the list;
  • Display all performed disinfection cycles;
  • Send the disinfection cycles log (or sorted data) to a network or Wi-Fi printer;
  • Transfer the data on the disinfection cycles to a computer through special software supplied with the unit;
  • Start the unit;
  • Immediately stop the light generation;
  • Display time remaining till the disinfection cycle end;
  • Display information on all malfunctions during the unit operation. 

To prevent dust pollution and damage to the xenon lamp, it is safely positioned inside the frame. For disinfection, the lamp is lifted from the frame automatically by the actuator.

Before the unit starts generating light pulses, a sound warning is given to leave the room for safety considerations.

The unit is protected by a registered trademark of the manufacturer.

Parameter

Value

Disinfection range with 99.99% efficiency for one cycle

Up to 5 м

Light source   

Pulsed xenon ultraviolet lamp

Electric power supply

230 V, 50 Hz

Power consumption

1.5 kW ay most

Delay after the START button is pressed before actual light pulses generation

18-20 src after the START button is pressed on the control panel, or 25-28 sec - on the remote control

Control

Sensor control panel and remote control

Safety conformance

IEC 61010-1:2010

International standarts compliance

CE, ISO 9001-2015, ISO 13485:2015

The unit has a computer-aided control system that allows custom operating modes for disinfecting surfaces with germicidal efficiency of 99.99 % and more.

The operator only needs to input the distance to the furthest point of the surface to be treated on the control panel or remote control. At that, all the area closer than the set distance, including the air, will be disinfected with even higher efficiency.

The unit automatically calculates the time required to reach the 99.99 % efficiency at the set distance.

Guaranteed efficiency

The unit is able to disinfect the surfaces with in presence of any organic load (blood, sputum, saliva, urine) without losing the 99.99 % efficiency.

Yanex-2M efficiency
Specific times of air and surfaces disinfection with 99.99% efficiency

Yanex-2M efficiency
An example of decontamination efficiency for open surfaces at 2-minutes’ time within 5 minutes (Moscow Scientific Research Institute of epidemiology and microbiology named after G.N. Gabrichevskiy, 2012)

Built-in sensors in real-time mode monitor:

  • Germicidal flow of the pulsed lamp, as well as sustain it on the preset level; 
  • Unit’s operating, and correct it in case of any disturbance in the preset parameters. 

The innovative mobile pulsed ultraviolet unit “Yanex-2M” by Melitta will sustain the highest disinfection quality at all times!

Back to the list